Flatout Electric

OSHPARK (2-layer PCB specs)

Starter PCB Suggestions

Every design is different (size constraints, cost, speed, impedance, power) these are general rules for producibility with multiple vendors, make your own decisions in the end because you will be the one dealing with the end result.

Signals 0.2mm Trace Width (non-imp spec'ed signals)

Power 0.5mm+ Trace Width 

Clearance (General) 0.2mm (Plane-Edge) 0.5mm

Via (Hole/Pad) 0.4/0.9mm

Header Pads (1.27mm) 0.6/1.0mm (2.0mm) 0.8/1.2mm

Header Pads (2.54mm) 0.9/1.5mm

Mounting Holes 1.0/2.0mm   Standoffs V6516A    V6622A

Silkscreen 0.15mm True Type Arial Narrow Bold